Question is ⇒ In a 4 bit weighted resistor D/A converter, the resistor value corresponding to LSB is 32 kΩ. The resistor value corresponding to MSB will be, Options are ⇒ (A) 32 KΩ, (B) 16 KΩ, (C) 8 KΩ, (D) 4 KΩ, (E) , Leave your comments or Download question paper.

Question is ⇒ In a 4 bit weighted resistor D/A converter, the resistor value corresponding to LSB is 32 kΩ. The resistor value corresponding to MSB will be, Options are ⇒ (A) 32 KΩ, (B) 16 KΩ, (C) 8 KΩ, (D) 4 KΩ, (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	In a 4 bit weighted resistor D/A converter, the resistor value corresponding to LSB is 32 kΩ. The resistor value corresponding to MSB will be
A.	32 KΩ [Wrong Answer]
B.	16 KΩ [Wrong Answer]
C.	8 KΩ [Wrong Answer]
D.	4 KΩ [Correct Answer]
View Answer 4 -1 Explanation:- Answer : D Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒ Suppose a microprocessor has memory locations from 0000 to 3FFF, each storing I byte. How many bytes the memory can storing I bytes the memory can store?
4384
8644
12688
16384

⇒ Entropy gives
measure of Uncertainty
rate of Information
average information
probability of Information

⇒ e^-3^t is a
energy signal
power signal
Both (a) and (b)
none

⇒ Which of the following transducers is most suitable for monitoring continuous variations in very fine thickness of a material?
Diaphragm
Capacitor
L.V.D.T.
Piezoelectric crystal.

⇒ In 8085 microprocessor, what is the length of SP (stack) pointer?
6 bits
8 bits
12 bits
16 bits

⇒

Assertion (A): Different symbols are used for different gates

Reason (R): IEEE symbols are the same as traditional symbols for gates.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is true, R is false
A is false, R is true

⇒ In the circuit of figure, v₁ = v₂ = 10 V.
I₁ = I₂
I₁ > I₂
I₂ > I₁
I₁ = 0

⇒ As the temperature of a pure silicon specimen is increased
the number of free electrons increases
the number of holes decreases
the number of holes increases
the number of free electrons and holes increases

⇒ Two coils having equal resistance but different inductances are connected in series. The time constant of the series combination is
average of the time constants of individual coils
sum of the time constants of the individual coils
geometric mean of the time constants of individual coils
product of the time constants of the individual coils

⇒ How many JK flip-flops are needed to make a 4-bit shift register?
2
4
6
8

⇒ A function f(t) = k e^at is __________ for (a > 0).
stable
unstable
marginal
none

⇒ A BJT amplifier has a power gain of 0.5 from source to base. The power gain in dB is
-0.3 dB
-3 dB
-6 dB
-10 dB

⇒ In a 3 phase full converter, the firing angle is less than 60°. The instantaneous output voltage
will have positive part only
will have both positive and negative parts
may have both positive and negative parts
will have negative part if load is inductive

⇒ Noise temperature of Sun is more than __________ °K.
1000
5000
100000
500

⇒ Two wattmeter method of 3-phase power measurement can be used to find
total active power
total active power and power factor
total active power and reactive power
total active power, power factor, apparent power, and reactive power

⇒ In the given fi
0 rad/sec
2 rad/sec
3/2 rad/sec
None of these

⇒ Which of the following statement is correct?
Decimal 9 is represented as 1011 in Excess-3 code
Decimal 9 is represented as 1001 is BCD code
Decimal 10 is represented as 1100 is Gray code
Decimal 10 is represented as 1001 in binary code

⇒ A two branch parallel tuned circuit has a coil of resistance 100 Ω and inductance 0.005 H in one branch and 10 nF capacitor in the second branch. At resonance frequency, the dynamic resistance is
1 Ω
10 Ω
100 Ω
more than 100 Ω

⇒ In order to protect a MOSFET against damage from any stray voltage at the gate
grounding rings are provided
terminals are shorted
source terminal is earthed during transit
none of these

⇒ Hysteresis loss in a transformer working at 220 V and at a frequency of 50 Hz is 100 W. When the transformer is operated at 220 V and at a frequency of 100 Hz, what is the hysteresis loss?
50 W
100 W
200 W
400 W

⇒ Between which regions does BJT act like switch?
Cut off and saturation
Cut off and forward active
Forward active and cut off
Saturation and active

⇒ In the network shown in figure, the voltage drops across R₂ and R₃ are 10 V and 16 V with polarities as shown. The current in R_{1is 9 A and directed towards node 0
is 9 A and directed away from node 0
is 9 A but directed of current cannot be found
is impossible to be found}

⇒ A sphere with charge Q was placed in, but not touching a larger hollow sphere. If there is any charge initially on the outer sphere; to remove it the outer sphere was earthed momentarily, and then the inner sphere was removed. The charge remaining on the outer sphere was then measured. This charge was found to be __________ to the charge on the inner sphere.
equal and of same again
equal and of opposite sign
unequal and of same sign
unequal and of opposite sign

⇒ Three point tracking can be achieved with
gang condenser
variable selectivity
paddar capacitor
any of the above

⇒ To produce p type semiconductor we add
acceptor atoms
donor atoms
pentavalent impurity
trivalent impurity

⇒ The skip distance does not depends upon
the power transmitted
type of wave propagation
angle of beaming of the wave
frequency of the signal transmitted

⇒ Consider the following program in C 1
-1
1.15
-1.15

⇒ In a circular waveguide the dominant mode is
TE₀₁
TE₁₁
TE₂₀
TE₂₁

⇒ The maximum permissible distance between two samples of a 10 kHz signal
100 μ sec
50 μ sec
10 μ sec
none

⇒ The voltage induced in a loop of wire rotating in a strong and steady magnetic field is
pulsating dc
dc
rectified ac
ac