Question is ⇒ Two independence parameters Z11 and Z12 of the two-port network in the figure, Options are ⇒ (A) Z11 = 2.75 Ω and Z12 = 0.25 Ω, (B) Z11 = 3 Ω and Z12 = 0.5 Ω, (C) Z11 = 3 Ω and Z12 = 0.25 Ω, (D) Z11 = 2.25 Ω and Z12 = 0.5 Ω, (E) , Leave your comments or Download question paper.

Question is ⇒ Two independence parameters Z11 and Z12 of the two-port network in the figure, Options are ⇒ (A) Z11 = 2.75 Ω and Z12 = 0.25 Ω, (B) Z11 = 3 Ω and Z12 = 0.5 Ω, (C) Z11 = 3 Ω and Z12 = 0.25 Ω, (D) Z11 = 2.25 Ω and Z12 = 0.5 Ω, (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	Two independence parameters Z₁₁ and Z₁₂ of the two-port network in the figure
A.	Z₁₁ = 2.75 Ω and Z₁₂ = 0.25 Ω [Correct Answer]
B.	Z₁₁ = 3 Ω and Z₁₂ = 0.5 Ω [Wrong Answer]
C.	Z₁₁ = 3 Ω and Z₁₂ = 0.25 Ω [Wrong Answer]
D.	Z₁₁ = 2.25 Ω and Z₁₂ = 0.5 Ω [Wrong Answer]
View Answer 1 -1 Explanation:- Answer : A Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒ Figure shows an RC circuit. The magnitude plot V₂/V_{1will rise exponentially to R₂/(R₁ + R₂) as ω → ∞
will rise linearly to R₂/(R₁ + R₂) as ω → ∞
will decrease to zero as ω → ∞
will rise 1 at ω = 0 and then decrease as ω → ∞}

⇒ The resistance of the circuit shown is figur
5 Ω
More than 6 Ω
More than 4 Ω
Between 6 and 7 Ω

⇒ A computer monitor uses 180 W in normal operation and 20 W in sleep mode. The computer is on all the 24 hours but is in sleep mode for 18 hours a days. The energy units saved in 30 days are
0.54 units
86.4 units
2.88 units
4.8 units

⇒ The phase difference (jω - p₁ )
phasor directed from p₁ to jω
phasor directed from origin to p₁
phasor directed from origin to jω point
phasor directed from jω to p₁

⇒ All magnetic materials exhibit the phenomenon of saturation.
TRUE
FALSE

⇒ A 6 bit ladder A/D converter has input 101001. The output is (assume 0 = 0 V and 1 = 10 V)
4.23
6.41
5.52
9.23

⇒ A uniform wave have components
in the perpendicular direction E existing while H is zero
in the direction of propagation E existing while H is zero
E and H are zero in direction perpendicular to direction of propagation
E and H existing only in direction perpendicular to direction of propagation

⇒ Shaft encoder is used to measure
angular position
linear position
linear velocity
linear acceleration

⇒ The power in the signal s(t) = 8 cos (20 p - p/2) + 4 sin (15 pt) is
40
41
42
82

⇒ In root locus analysis the breakaway and break in points
lie on the real axis
either lie on the real axis or occur in complex conjugate pairs
always occur in complex conjugate pairs
none of the above

⇒ In the network shown in figure, the voltage drops across R₂ and R₃ are 10 V and 16 V with polarities as shown. The current in R_{1is 9 A and directed towards node 0
is 9 A and directed away from node 0
is 9 A but directed of current cannot be found
is impossible to be found}

⇒ Two infinitely long wires carrying current are as shown in the figure below. One wire is in the y-z plane and parallel to the y-axis. The other wise is in the x-y plane and parallel to the x-axis. Which components of the resulting magnetic field are non-zero at the ori
x, y, z components
x, y components
y, z components
x, z components

⇒ Which one of the following is not necessarily an advantage of the phase cancellation method of obtaining SSB over the filter method?
It is possible to generate SSB at any frequency
SSB with lower audio frequencies present can be generated
Switching from one sideband to other is simpler
There are more balanced modulators; therefore the carrier is suppressed better

⇒ In a display specified as 600 x 400 the number of pixels across the display screen is
600
400
240000
either (a) or (b)

⇒ The given figure shows dB magnitude plots for type 0, type 1 and type 2 systems. Out of t
curves 1, 2, 3 are for type 0, 1, 2 systems respectively
curves 1, 2, 3 are for type 2, 1, 0 systems respectively
curves 1, 2, 3 are for type 1, 0, 2 systems respectively
curves 1, 2, 3 are for type 1, 2, 0 systems respectively

⇒ The most serious problems in ac bridge measurement is
eddy currents
leakage current
residual magnetism
stray fields

⇒ A parallel plate capacitor having C = 200 x 10^-12 F has loss dielectric having tan δ = 4 x 10^-4. At an ac voltage of f = 10⁶ Hz and peak value 2 V, the dielectric losses are
10^-8 W
10^-6 W
10^-4 W
10^-2 W

⇒ Which of the following could be the equation for non-linear resistor shown in figu
a + be + ce² + de³
a - be - ce² - de³
a + be + ce² - de³
a + be - ce² - de³

⇒ If f_h(t) is Hilbert transform of f(t), then Hilbert transform of f_h(t) is
-f(t)
+f(t)
f²(t)
f(t)

⇒ In 8085 microprocessor system, can an input and output port have same port address?
Yes
No
Insufficient data
None of these

⇒ An electric charge Q is placed in a dielectric medium which of the following quantities are independent of the dielectric constant ε of the medium
electric potential V and electric field intensity E
displacement density D and displacement φ
electric field intensity E and displacement φ
electric potential V and displacement φ

⇒ Which of the following is incorrect?
11101 + 10 = 11111
(8)₈ + (2)₈ = (11)₈
(8)₁₆ + (7)₁₆ = E
All of them are incorrect

⇒ Two coils are connected in parallel. Their fluxes are adding. If the connections of one of the coils are reversed, the total inductance of the arrangement
will decrease
may increase or decrease
will remain the same
will increase

⇒ Consider the following reasons for using antenna coupler

To prevent illegal radiation of spurious frequencies
To tune out reactive components of antenna impedance
To have correct value of load impedance for transmitter.

Which of the above are correct?
1, 2, 3
1, 2
1 only
2, 3

⇒ What is the terminal count in decimal form?
1579
1681
1881
2014

⇒

Assertion (A): PC-XT is a personal computer.

Reason (R): PC-XT uses a floppy drive and has a medium sized hard disc.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is correct R is wrong
A is wrong R is correct

⇒ The clear data and present input of the JK flip-flop are known as
direct inputs
synchronous inputs
indirect inputs
either direct inputs or synchronous inputs

⇒ Which of the following is a valid real variable in FORTRAN 77?
KPR
LINE
JOB
RATE

⇒ Which of the following are included in the architecture of a computer?

Addressing modes, CPU
Instruction set, data formats
Secondary memory, operating system

Select the correct answer from the codes given below:
1 and 2
1 and 3
2 and 3
3 only

⇒ The Fourier transform of f(t) = cos ω₀t is
p[δω₀ + δ(- ω₀)]
p[δ(ω - ω₀) + δ(ω + ω₀)]
p[δω₀ - δ(- ω₀)]
p[δ(ω - ω₀) - δ(ω + ω₀)]