Question is ⇒ The instruction <code>MOV M, r</code> in 8085, Options are ⇒ (A) causes content of register r to be moved to memory location whose address is in register H, L and uses register indirect addressing mode, (B) causes the content of memory location whose address is in register H, L to move to register r and uses register indirect addressing mode, (C) causes the content of register r to be moved to memory location whose address is in register H, L and uses immediate addressing mode, (D) causes the content of memory location whose address is in register H, L to move to register r and uses immediate addressing mode, (E) , Leave your comments or Download question paper.

Question is ⇒ The instruction <code>MOV M, r</code> in 8085, Options are ⇒ (A) causes content of register r to be moved to memory location whose address is in register H, L and uses register indirect addressing mode, (B) causes the content of memory location whose address is in register H, L to move to register r and uses register indirect addressing mode, (C) causes the content of register r to be moved to memory location whose address is in register H, L and uses immediate addressing mode, (D) causes the content of memory location whose address is in register H, L to move to register r and uses immediate addressing mode, (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	The instruction `MOV M, r` in 8085
A.	causes content of register r to be moved to memory location whose address is in register H, L and uses register indirect addressing mode [Correct Answer]
B.	causes the content of memory location whose address is in register H, L to move to register r and uses register indirect addressing mode [Wrong Answer]
C.	causes the content of register r to be moved to memory location whose address is in register H, L and uses immediate addressing mode [Wrong Answer]
D.	causes the content of memory location whose address is in register H, L to move to register r and uses immediate addressing mode [Wrong Answer]
View Answer 1 -1 Explanation:- Answer : A Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒

Assertion (A): A balun is an RF impedance matching transformer.

Reason (R): Sometimes a booster amplifier is used with a TV set.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is correct but R is wrong
A is wrong but R is correct

⇒ With on-chip decoding, n address lines can access
2n memory locations
2n² memory locations
2ⁿ memory locations
n² memory location

⇒ The direction in a Yagi Uda antenna
is longer than the radiating element
is shorter than the radiating element
can be longer or shorter than the radiating element
does not exist

⇒ In a thyristor, the forward breakover voltage
is constant
may be constant or may depend on gate current
decreases as gate current is increased
increases as gate current is increased

⇒ The 8085 microprocessor is interrupted while executing MOV instruction at location 0210 H. What is the location at which contents of register E are stored.
054 CH
054 DH
054 EH
054 FH

⇒ To obtain very high input and O/P impedance in a feedback amplifier, the type of feedback utilized
voltage series
current series
voltage shunt
current shunt

⇒ If A = 131 ± 4 and B = 106 ± 4, the percentage range of doubt in A - B is
0.04
0.08
0.16
0.32

⇒ A cascade amplifier stage is equivalent to
a common emitter stage followed by a common stage
a common base stage followed by an emitter follower
an emitter follower stage followed by a common base stage
a common base stage followed by a common emitter stage

⇒ In a push pull circuit
each transistor conducts for 180°
each transistor conducts for more than 180° but less than 360°
each transistor conducts for less than 180°
the period of conduction of each transistor depends on circuit configuration

⇒ A single element strain gauge bridge has two fixed resistances R₁ and R₁ of 120 Ω each and a variable resistance which gives full deflection at 120 Ω for zero strain and 120.6 Ω for straine e. If gauge factor is 2, strain e is
0.0025
0.0035
0.005
0.0075

⇒ A power factor meter has
one current and one pressure circuit
one current circuit and two pressure circuits
two current circuits and two pressure circuits
two current circuits and one pressure circuit

⇒ To avoid the effect of stray magnetic fields in ac bridge we can use
magnetic screening
Wagner earthing device
wave filter
transformer

⇒

Match the following:

	List I (Laws of Boolean)		List II (Relation algebra)
A.	Distributive law	1.	x + x = x
B.	DeMorgans law	2.	x(y + z) = xy + xz
C.	Idempotent law	3.	(x) = x
D.	Involution law	4.	(x + y) = xy

A-1, B-2, C-3, D-4
A-2, B-4, C-1, D-3
A-3, B-4, C-1, D-2
A-4, B-1, C-2, D-3

⇒ When a ferromagnetic substance is magnetised there are small changes in dimensions. This phenomenon is called
hysteresis
magnetostriction
diamagnetism
dipolar relaxation

⇒ The transistor specification number 2N refers to
triac
diac
junction transistor
FET with one gate

⇒ According to CCIR standards, the Vestigial Sideband (VSB)
video frequencies upto 4 MHz are transmitted
video frequencies upto 5 MHz are transmitted
video frequencies upto 5.5 MHz are transmitted
video frequencies upto 6 MHz are transmitted

⇒ Which of the following terms are equivalent?

A ⊕ B ⊕ C
A ⊕ B ⊙ C
A ⊙ B ⊕ C
A ⊙ B ⊙ C

1 and 4; 2 and 3
1 and 3
2 and 3
1, 2 and 4

⇒ If quadratic equation x² - 1000x + 25 = 0 is solved using floating point arithmetic with 4 digit mantissa, the roots are
.1000 E 4 and .1000 E 4 respectively
.0000 E 4 and .0000 E 4 respectively
.1000 E 4 and .0000 E 4 respectively
None of the above

⇒ A T network is inserted between source and R as shown in figure. The resistance seen by the source remains the same with or without T network when
5 Ω
10 Ω
15 Ω
20 Ω

⇒ The standard deviation of a set of observations is the rms value of the deviation from the arithmetic mean.
TRUE
FALSE

⇒ In the above case, what will be the value of capacitor to obtain 100 kHz frequency?
0.0065 pF
0.0130 pF
0.0260 pF
0.520 pF

⇒ Laplacian of a scalar function V is
gradient of V
gradient of the gradient of V
divergence of V
divergence of the gradient of V

⇒ The heat sink disposes off heat mainly by
radiation
natural convection
forced convection
conduction

⇒ DC ampere hour meter is an indicating instrument.
TRUE
FALSE

⇒ The eigen values of a skew symmetric matrix are
always zero
always pure imaginary
either zero or pure imaginary
always real

⇒ For the system in the given figure, the gain margi
0
low
+ ∞
none of the above

⇒ In a hi-fi system the frequency response over the audio frequency range should be within
± 10 dB
5 dB
2 dB
1 dB

⇒ Find I in 4 Ω resis
0.0416666666666667
0.5 A
0.75 A
0.95 A

⇒ A FET is a __________ controlled device whereas a bipolar transistor is a __________ controlled device.
gate, drain
drain, gate
current, voltage
voltage, current

⇒ For a voltage transfer function H(s), realizable by RLC network, the following statements are made

H(s) cannot have a pole at s = 0
H(s) cannot have a pole at s = ± j4
H(s) cannot have a pole at s = ∞
H(s) cannot have a pole at s = + 2

Of these statements
3 and 4 are correct
2 and 4 are correct
1 and 2 are correct
1 and 3 are correct