Question is ⇒ The control logic for a binary multiplier is specified by a states diagram. The state diagram has four states and two inputs. To implement it by the sequence register and decoder method., Options are ⇒ (A) two flip-flop & 2 x 4 decoder are needed, (B) four flip-flop & 2 x 4 decoder are needed, (C) two flip-flop & 3 x 9 decoder are needed, (D) four flip-flop & 3 x 9 decoder are needed, (E) , Leave your comments or Download question paper.

Question is ⇒ The control logic for a binary multiplier is specified by a states diagram. The state diagram has four states and two inputs. To implement it by the sequence register and decoder method., Options are ⇒ (A) two flip-flop & 2 x 4 decoder are needed, (B) four flip-flop & 2 x 4 decoder are needed, (C) two flip-flop & 3 x 9 decoder are needed, (D) four flip-flop & 3 x 9 decoder are needed, (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	The control logic for a binary multiplier is specified by a states diagram. The state diagram has four states and two inputs. To implement it by the sequence register and decoder method.
A.	two flip-flop & 2 x 4 decoder are needed [Correct Answer]
B.	four flip-flop & 2 x 4 decoder are needed [Wrong Answer]
C.	two flip-flop & 3 x 9 decoder are needed [Wrong Answer]
D.	four flip-flop & 3 x 9 decoder are needed [Wrong Answer]
View Answer 3 -2 Explanation:- Answer : A Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒ In 8085 microprocessor, which of the following is not vectored interrupt?
RST 5.5
RST 6.5
RST 7.5
INTR

⇒ How is an N-channel junction Field Effect Transistor operated as an amplifier?
With a forward bias gate source junction
With a reverse bias gate-source junction
With a open gate source junction
With a shorted gate source junction

⇒ In digital computer programming, subroutines are used
to reduce program execution time at the expense of more memory
to reduce storage requirements
to increase programming ease and reduce storage requirements
because most of the functions are same

⇒ The word 'LORAN' means
long range navigation
long range TV transmission
long range cable transmission
either (b) or (c)

⇒ In attenuation band, β is an odd multiple of p.
TRUE
FALSE

⇒ Which is not a valid dimension statement?
DIMENSION KAT(10, 20)
DIMENSION BAT (30, 20)
DIMENSION KAT(K, 10)
DIMENSION BAT (10, 5)

⇒ Which materials find application in MASER?
Diamagnetic
Paramagnetic
Ferromagnetic
Ferrimagnetic

⇒ FF₁₆ when converted to 8421BCD =
0000 0101 0101
0010 0101 0101
1111 0101 0101
1000 0101 0101

⇒ A (0.75 - j50) ohm load is connected to a coaxial transmission line of Z₀ = 75 ohms at a frequency of 10 GHz Which of the following will be the best method of matching?
Connecting an inductance at the end
Connecting a short circuited stub at the load
Connecting a capacitance at some distance from the load
Connecting a short circuited stub at some specified distance from the load

⇒ Auto correlation for t = 0 is equal to
average power S of waveform
square of average power S of waveform
half of average power S of waveform
square root of average power S of waveform

⇒ For a series resonant circuit at low frequency impedance is __________ and at high frequency circuit impedance is __________ .
capacitive, inductive
inductive, capacitive
resistive, inductive
capacitive, resistive

⇒ The number of thyristors in a single phase fully controlled bridge rectifier is
16
8
4
2

⇒ If 10 V is the peak voltage across the secondary of the transformer in a half wave rectifier (without any filter circuit), then the maximum voltage on the reverse biased diode will be
20 V
14.14 V
10 V
7.8 V

⇒ A signal m(t) is multiplied by a sinusoidal waveform of frequency f_c such
0.5 M(f + f_c)
0.5 M(f - f_c)
0.5 M(f + f_c) + 0.5 M(f - f_c)
0.5 M(f - f_c) + 0.5 M(f - f_c)

⇒ Narrowband FM signal can be considered to be equal to
PM
AM
SSB
DSB

⇒ Consider the following features of an instrument

suitable for both ac and dc
free from hysteresis and eddy current errors
No waveform and frequency errors
it is essentially a voltmeter

This instrument is
moving iron
moving coil
electrostatic
dynamometer

⇒ RC network shown in the given figure can provide a maximum theoretical phase shif
90°
180°
270°
360°

⇒ Which of the following is a balanced line?
Coaxial line
Strip line
Microstrip line
TV twin lead

⇒ Most small signal transistors are
N-P-N, silicon, in a plastic package
P-N-P, silicon, in a plastic package
N-P-N, germanium in a metallic case
P-N-P, germanium in a metallic case

⇒ Which of the following modes cannot exist in rectangular resonant cavity?
TE₁₁₀
TE₀₁₁
TM₁₁₀
TM₁₁₁

⇒ A half adder adds __________ bits and a full adder adds __________ bits.
two, three
three, four
four, six
two, four

⇒ Feedback factor may be less or more than 1.
TRUE
FALSE

⇒

Assertion (A): Temperature control of the passenger compartment of car uses both feed forward and feedback controls.

Reason (R): Feed forward control gives corrective action before the disturbance affects the output and feedback control applies corrective action after output changes.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is correct but R is wrong
R is correct but A is wrong

⇒ FSK is a system involving
pulse modulation
frequency modulation
amplitude modulation
phase modulation

⇒ In deriving ac equivalent circuit for an amplifier circuit we short circuit
all resistors
all transistors
all inductors
all capacitors

⇒ Cross talk is due to reception of portions of a signal from one channel into another.
TRUE
FALSE

⇒ The oscillator shown in figure
Clapp oscillator
R-C Phase shift oscillator
Hartley oscillator
Colpitt's oscillator

⇒ S is closed for a long time and steady state is reached. S is opened at t(0^-). The voltage marked V is V₀ at t = 0⁺ and V_f at t = ∞. Then value of V₀ and V_f are respecti
8, 8
0, 1
4, 0
4, 8

⇒ A speech signal, band limited to 4kHz and peak voltage varying between + 5V and - 5V is sampled at the Nyquist rate. Each sample is quantized and represented by 8 bits. If the bits 0 and 1 are transmitted using bipolar pulses, the minimum bandwidth required for distortion free transmission is
64 kHz
32 kHz
8 kHz
4 kHz

⇒ In a discharging R-L circuit voltage across the resistor exhibits
a linear rise
a linear decay
an exponential growth function
an exponential decay function