Question is ⇒ In Quine-Mclusky method of Boolean function reduction; __________ , are treated as __________ and therefore discrepancies may occur in the final solution, therefore this method is not applicable to the functions with __________ ., Options are ⇒ (A) zeros, don't care conditions, zeros, (B) one's, don't care conditions, one's, (C) don't care conditions, zeros, don't care conditions, (D) don't care conditions, don't care conditions, don't care conditions, (E) , Leave your comments or Download question paper.

Question is ⇒ In Quine-Mclusky method of Boolean function reduction; __________ , are treated as __________ and therefore discrepancies may occur in the final solution, therefore this method is not applicable to the functions with __________ ., Options are ⇒ (A) zeros, don't care conditions, zeros, (B) one's, don't care conditions, one's, (C) don't care conditions, zeros, don't care conditions, (D) don't care conditions, don't care conditions, don't care conditions, (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	In Quine-Mclusky method of Boolean function reduction; __________ , are treated as __________ and therefore discrepancies may occur in the final solution, therefore this method is not applicable to the functions with __________ .
A.	zeros, don't care conditions, zeros [Wrong Answer]
B.	one's, don't care conditions, one's [Wrong Answer]
C.	don't care conditions, zeros, don't care conditions [Correct Answer]
D.	don't care conditions, don't care conditions, don't care conditions [Wrong Answer]
View Answer 1 -1 Explanation:- Answer : C Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒

Assertion (A): Conductors do not permit propagation of waves more than a short distance into the conductor at microwave frequencies.

Reason (R): The relaxation time constant for conductors is much small than the period of centimetric EM wave.

Both (A) and (R) are true and (R) is the correct explanation of (A)
Both (A) and (R) are true but (R) is not the correct explanation of (A)
(A) is true but (R) is false
(A) is false but (R) is true

⇒ Consider the following stateme
1, 4 are correct
1 and 2 correct
1, 2, 3 are correct
2, 3, 4 are correct

⇒ VTM stands for voltage tunable magnetron.
TRUE
FALSE

⇒ Bitter powder patterns prove the existence of domains.
TRUE
FALSE

⇒ India's Polar Satellite Launch vehicle (PSLV) to be ready in 1991 is designed to launch 1000 kg spacecraft into __________ orbit.
geostationary
equatorial
polar
sun-synchronous polar

⇒ Antenna used for T.V. broadcasting is
long dipole
metal horn
crossed dipole
log periodic

⇒ Epitaxial growth is used in IC_s
because it produces low parasitic capacitance
because it yields back to back isolating pn Junction
to grow single crystal n doped silicon on a single crystal P-type substrate
to grow Selectivity single crystal P doped silicon of one resistivity on a P type substrate of a different resistivity

⇒ When a semi-conductor is doped, its electrical conductivity
increases
decreases in the direct ratio of the doped material
decreases in the inverse ratio of the doped material
remains unaltered

⇒ Which camera tube has highest sensitivity and very wide spectral response?
Vidicon
Plumbicon
New vicon
Saticon

⇒ Insulation resistance of a cable is directly proportional to its length.
TRUE
FALSE

⇒ Broadcasting antennas are generally
omnidirectional type
vertical type
horizontal type
helical

⇒ In the fabrication of n-p-n transistor in an IC, the buried layer on the P-type substrate is
P⁺ -doped
n⁺ -doped
used to reduce the parasitic capacitance
located in the emitter region

⇒ A thyristor has maximum allowable junction temperature of 110° C and the ambient temperature is 40°C, If the maximum internal power dissipation is 50 W, the thermal resistance is
2° C/W
1.4° C/W
0.7°C/W
2.2° C/W

⇒ In case of surface waves the field strength at a point is directly proportional to
antenna height
wave frequency
current of the antenna
distance of the point from the antenna

⇒ If γ = (S₀/N₀)/(S_i/N_m) where S₀ and S₁ are signal power output and signal power input and N₀ and N_m are noise power output and noise power input, the value of γ for SSB-SC and DSB-SC amplitude modulated system respectively are
1 and 1
1 and 2
2 and 1
0.5 and 0.5

⇒ In a transistor push pull amplifier
there is no dc present in the output
there are no even harmonics in the output
both (a) and (b)
neither (a) nor (b)

⇒ The conductivity of germanium increases by about 6 percent per degree increase in temperature.
TRUE
FALSE

⇒ The frequency response of an ideal tuned amplifier should be as represented in figur
A
B
C
D

⇒ If J = 12 and X = 24.4 the result of the following FORTRAN 77 program will be 12, 144, 73.2
15.0, 144.0, 73.2
15.0, 144.0, 73
15. 144. 73

⇒ In a sine wave, maximum rate of change of voltage occurs at
ascent of the waveform
+ ve maximum
- ve maximum
between maximum and minimum

⇒ What will be minimum conversion rate in 6 bit dual slope A/D converter uses a reference of -6v and a 1 MHz clock. It uses a fixed count of 40 (101000).
9000
9259
1000
1000

⇒ When .9432 E - 4 is subtracted from .5452 E - 3 in normalized floating point mode
none of the numbers is changed
.9432 E - 4 is changed to .09432 E - 3 and .5452 E - 3 is not changed
.5452 E - 3 is changed to 5.452 E - 4 but .9432 E - 4 is not changed
both Ihe numbers are changed and their exponents are, made equal to -5

⇒ A power supply has full-load voltage of 20 V. What will be its no load voltage when its voltage regulation is 100%
0 V
10 V
20 V
40 V

⇒ In DTL the junction transistor serves as
inverter
buffer amplifier
both (a) and (b)
none of the above

⇒ A Hartley oscillator uses
a tapped capacitor
a tapped inductor
a tapped inductor for inductive feedback
none of the above

⇒

Assertion (A): Resistivity of a perfect single crystal of a metal goes to zero as T approaches zero.

Reason (R): Scattering of electrons is due to deviations from perfect periodicity of lattice.

Both A and R are true and R is correct explanation of A
Both A and R are true but R is not correct explanation of A
A is true but R is false
A is false but R is true

⇒ A modem is connected to PC at
serial port
parallel port
SCSI port
input port

⇒ Which control action is also called rate control?
Proportional
Derivative
Integral
Proportional plus integral

⇒ The sensitivity of human eyes is maximum at
white portion of spectrum
green portion of spectrum
red portion of spectrum
violet portion of spectrum

⇒ Typical values of voltage gain for CE, CB and CC amplifiers are
100, 100 and 1 respectively
100, 1 and 100 respectively
100, 1 and 1 respectively
1, 100 and 100 respectively