Question is ⇒ In Pascal an array declaration provides information to the Pascal processor to enable it to, Options are ⇒ (A) identify the variable as an array name, (B) reserve memory locations to store all the components of array, (C) check the values computed for subscripts expressions during program execution with the specified lower and upper limits of subscripts, (D) all of the above, (E) , Leave your comments or Download question paper.

Question is ⇒ In Pascal an array declaration provides information to the Pascal processor to enable it to, Options are ⇒ (A) identify the variable as an array name, (B) reserve memory locations to store all the components of array, (C) check the values computed for subscripts expressions during program execution with the specified lower and upper limits of subscripts, (D) all of the above, (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	In Pascal an array declaration provides information to the Pascal processor to enable it to
A.	identify the variable as an array name [Wrong Answer]
B.	reserve memory locations to store all the components of array [Wrong Answer]
C.	check the values computed for subscripts expressions during program execution with the specified lower and upper limits of subscripts [Wrong Answer]
D.	all of the above [Correct Answer]
View Answer 1 -1 Explanation:- Answer : D Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒

Assertion (A): The angular momentum of an atom is due to three contributions viz. orbital, electron spin and nuclear spin.

Reason (R): The nuclear spin magnetic moment is much more than electron spin magnetic moment.

Both A and R are true and R is correct explanation of A
Both A and R are true but R is not correct explanation of A
A is true but R is false
A is false but R is true

⇒ Decimal -90 equals __________ in 8 bit 2s complement
1000 1000
1010 0110
1100 1100
0101 0101

⇒ A thyristor is reverse biased. A positive gate pulse is applied. The thyristor
will be turned on
may or may not turn on
will not turn on
will turn on after sometime

⇒ The reduced form of the func
A(C D + E F + D E) + D E
(A + C + D + E)(D + E + F)
(C + D + E + A)(A + D + E + F)
A C D + A E F + A(D ⊕ E)

⇒ Consider the following logical IF statement in FORTRAN 77 IF (SALT - PEPPER) 11, 11, 13
IF (SALT - PEPPER) 13, 11, 13
IF (SALT - PEPPER) 13, 11, 11
IF (SALT - PEPPER) 11, 13, 13

⇒ A cascade amplifier stage is equivalent to
a common emitter stage followed by a common stage
a common base stage followed by an emitter follower
an emitter follower stage followed by a common base stage
a common base stage followed by a common emitter stage

⇒ A nibble corresponds to
2 successive bits of data
4 successive bits of data
8 successive bits of data
16 successive bits of data

⇒ Two network said to be dual to each other
if mesh equation of one is same to other of node equation
if mesh equation of both is same
if node equation of both is same
neither mesh equation nor node equation is same

⇒ When a diode is forward biased, the diode current is
high
low
zero
low or zero

⇒ In all insulators the bonding is covalent.
TRUE
FALSE

⇒ Which one of the following is true?
Characteristic impedance of twin wire feeder and coaxial cable are nearly the. same
The characteristic impedance of coaxial cable is more than that of twin wire cable
The characteristic impedance of twin wire cable is more than that of coaxial cable
The characteristic impedance of a twin wire feeder may be more or less than that of coaxial cable

⇒ Which of the following stage is not present in AM receiver as compared to FM receiver?
AM amplifier
Demodulator
Amplitude limiter
AF amplitude

⇒ In a CE amplifier circuit the ac voltage between emitter and ground
is very high
may be high or low
is zero
depends on circuit configuration

⇒ A 400 W carrier is amplitude modulated with m = 0.75. If single side band suppressed carrier is used the total power in modulated wave is
400 W
512 W
112 W
56 W

⇒ If f_s be the signal frequency and f_i be the intermediate frequency then image frequency is given by
f_s + f_i
f_s ± f_i
f_s ± 2f_i
f_s + 2f_i

⇒ When the channel is noisy, producing a conditional probability of error p = 0.5; the channel capacity and entropy function would be, respectively,
1 and 1
1 and 0.5
0.5 and 1
0 and 1

⇒ Computers 'Basic input output system' is generally stored in RAM chips.
TRUE
FALSE

⇒ A rectifier circuit has load resistance R. It uses a capacitance filter having capacitance C. For low ripple in the output
RC should be 1
RC should be low
RC should be high
RC should be neither low nor high

⇒

Assertion (A): The closeness of G(jω) locus to (- 1 + j0) point can be used as a measured of margin of stability.

Reason (R): When the G(jω) locus comes close to encircling (- 1 + j0) point the system becomes oscillatory.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is correct but R is wrong
R is correct but A is wrong

⇒

Assertion (A): A small section of high impedance line is equivalent to a series inductance.

Reason (R): A small section of a low impedance line is equivalent to a series resistance.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is correct but R is wrong
A is wrong but R is correct

⇒ An m derived low pass filter has f_c = 1000 Hz and m = 0.6. This filter will have infinite attenuation at
f = 1250 Hz
all frequencies above 1000 Hz
f = 1562.5 Hz
f = 1666.67 Hz

⇒ A circular waveguide carries TE₁₁ mode whose radial electric-field is given
10 cm
3p cm
2p cm
8 cm

⇒ A microprocessor needs memory chips and input-output chip to form a microcomputer.
TRUE
FALSE

⇒ An op-amp has zero gain for common mode inputs. Then CMRR =
zero
infinite
high
low

⇒ A JFET is a
unipolar device
bipolar device
tripolar device
none of the above

⇒ In filter system of sideband suppression the advantage of using mechanical filter is
smaller size
good bandpass
good attenuation characteristics
all of the above

⇒ In an op-amp comparator, the positive or negative output is
saturated
amplifier
unsaturated
any of the above

⇒ Ferroelectric materials are those which
cannot be polarized
have a permanent polarization
have a_e equal to zero
have μ_p = 0

⇒ The number of thyristors in a single phase fully controlled bridge rectifier is
16
8
4
2

⇒ The following components are used to measure power output of a 2 kW TWT amplifier

TWT
Low pass/High pass filter
Low power 20 dB attenuator
40 dB directional coupler with matched load
Power meter.

The correct sequence of connections of these components is:
1, 4, 2, 3, 5
1, 3, 4, 2, 5
1, 2, 4, 3, 5
1, 4, 3, 2, 5