Question is ⇒ In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres., Options are ⇒ (A) polythene, (B) PVC, (C) rayon, (D) polyvinyl acetate, (E) , Leave your comments or Download question paper.

Question is ⇒ In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres., Options are ⇒ (A) polythene, (B) PVC, (C) rayon, (D) polyvinyl acetate, (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres.
A.	polythene [Wrong Answer]
B.	PVC [Correct Answer]
C.	rayon [Wrong Answer]
D.	polyvinyl acetate [Wrong Answer]
View Answer 1 -1 Explanation:- Answer : B Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒ Paper like thin plastic articles can be produced by
blow moulding
vacuum thermo forming
injection moulding
none of these

⇒ Hot drink (e.g, tea) cups are usually made of
polystyrene
polythene
polypropylene
PVC

⇒ Most commonly used rubber vulcanisation agent is
sulphur
bromine
platinum
alumina

⇒ Contact lenses for eyes are made of perspex, which is nothing but
polymethylmethacrylate
polystyrene
unsaturated polyester
polypropylene

⇒ Glyptal used in the manufacture of paints & lacquers is a __________ polymer.
polyamide
polystyrene
polyester
polyacrylonitrile

⇒ Crystallisation of polymers is an undesirable property. Crystallisation of celluloid is prevented by adding
glycerol
nitro cellulose
camphor
none of these

⇒ The monomer for the production of neoprene rubber is
acetylene
chloroprene
isoprene
none of these

⇒ Zeigler process
produces high density polythene.
uses no catalyst.
produces low density polythene.
employs very high pressure.

⇒ Which of the following is not a polyolefin ?
Polystyrene
Polypropylene
Neoprene
None of these

⇒ Pick out the wrong statement.
Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre.
Crimp is a measure of the difference between the length of the straightened and unstraightend fibre.
Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning.
Nylon fibres have greater water absorption capacity than polyester fibres.

⇒ Which of the following polymers shows the highest anti-tacking properties ?
Melamine formaldehyde resin
Phenolic resin
Epoxy resin
Alkyd resin

⇒ Alkyd resin e.g., glyptal resin formed by phthalic anhydride and glycerene is not used
for surface coating of automobiles & air crafts.
for fibre making.
as plasticiser for PVC & nitrocellulose.
for film forming materials.

⇒ Peptizers like aromatic mercaptans (e.g. thiophenes) are added in rubber to
protect rubber goods from attack by oxygen & ozone present in the atmosphere.
reduce its viscosity to permit easier processing.
reduce the time of vulcanisation and quantity of vulcanising agent.
increase its viscosity.

⇒ Polyvinyl chloride (PVC)
is produced by polycondensation reaction.
uses either emulsion or suspension polymerisation methods.
can be made thermosetting by adding a plasticiser.
softening temperature is 200°C.

⇒ Condensation of bisphenol A with phosgene produces __________ which possess very good heat resistance.
polyurathane
polysulphone
polycarbonate
polyester

⇒ Polyhexamethylene adipimide is also known as
bakelite
nylon-66
epoxy resin
silicone rubber

⇒ Which of the following is stretched into fibres ?
Saturated polyester
Unsaturated polyester
Isoprene
Bakelite

⇒ __________ is not a condensation polymer.
Teflon
Nylon-66
Dacron
Polystyrene

⇒ Identify the group in which all the polymers mentioned can be used to make fibres.
Butadiene copolymers, Polyamides, Urea aldehyde
Cellulose derivatives, Polyisoprene, Polyethylene
Cellulose derivatives, Polyamides, Polyurathane
Polypropylene, Poly vinyl chloride, Silicon

⇒ Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are
5°C and 1 kgf/cm².
- 20°C and 1 kgf/cm².
0°C and 1 kgf/cm².
0°C and 3 kgf/cm².

⇒ __________ is a homopolymer.
Neoprene
Bakelite
Nylon-66
Terylene

⇒ Which of the following types of polymers has the strongest inter particle forces ?
Elastomers
Fibres
Thermoplastics
Thermosetting polymers

⇒ Polyesters are manufactured by the polycondensation reaction of
dibasic acid with dihydric alcohol.
a single monomer.
carboxylic acid with ethylene.
inorganic acid with ethylene glycol.

⇒ Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is
nylon-66
teflon
polyester
bakelite

⇒ Low density polythene as compared to high density polythene is
harder
tougher
chemically inert
more flexible

⇒ Molecular weight of polymers are in the range of
10 to 10³
10²-10⁷
10⁷-10⁹
10⁹-10¹¹

⇒ Polycaprolactum (Nylon - 6) is produced by the condensation polymerisation of caprolactum at 240-280°C in which the conversion of caprolactum is about __________ percent.
50
75
90
99

⇒ Styrene butadiene rubber is commercially manufactured by
bulk polymerisation
suspension polymerisation
solution polymerisation
emulsion polymerisation

⇒ Polymerisation process in which two or more monomers of chemically different nature take part is called
copolymerisation
addition polymerisation
chain polymerisation
none of these

⇒ Thermosetting plastic materials
can be repeatedly melted.
is useful for melt casting.
can not be melted after forming.
is useful for spinning.