Question is ⇒ In a tungsten filament lamp, Options are ⇒ (A) the current at the instant of switching is less than operating current, (B) the current at the instant of switching is more than operating current, (C) the current at the instant of switching is equal to operating current, (D) the current at the instant of switching may be less than or equal to operating current, (E) , Leave your comments or Download question paper.

Question is ⇒ In a tungsten filament lamp, Options are ⇒ (A) the current at the instant of switching is less than operating current, (B) the current at the instant of switching is more than operating current, (C) the current at the instant of switching is equal to operating current, (D) the current at the instant of switching may be less than or equal to operating current, (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	In a tungsten filament lamp
A.	the current at the instant of switching is less than operating current [Wrong Answer]
B.	the current at the instant of switching is more than operating current [Wrong Answer]
C.	the current at the instant of switching is equal to operating current [Wrong Answer]
D.	the current at the instant of switching may be less than or equal to operating current [Correct Answer]
View Answer 1 -2 Explanation:- Answer : D Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒ For the K map of the given figure, the simplified Boolean expressio
A C + A D + ABC
A B D + BC
A C D + AC
A C D + AC + BC

⇒ A TTL circuit with totem pole output has
high output impedance
low output impedance
very high output impedance
none of the above

⇒ A dc power supply has no load voltage of 30 V and full load voltage of 25 V at full load current of 1 A. The output resistance and voltage regulation respectively are
5 Ω and 25%
25 Ω and 20%
5 Ω and 16.7%
25 Ω and 16.7%

⇒ When R and L are connected in parallel, R > |Z|.
TRUE
FALSE

⇒ Which of the following operation are performed on linear queues?

Testing a linear queue for underflow
Enqueue operation
Dequeue operation
Testing a linear queue for overflow.

Select the correct answer using the codes given below the lists
1, 2 and 3
2, 3 and 4
1, 3 and 4
1, 2, 3 and 4

⇒ Plug and play is a hardware specification.
TRUE
FALSE

⇒ Compared to a p-n junction with N_A = N_D = 10¹⁴/cm³, which one of the following statements is TRUE for a p-n junction with N_A = N_D = 10²⁰/cm³?
Reverse breakdown voltage is lower and depletion capacitance is lower
Reverse breakdown voltage is higher and depletion capacitance is lower
Reverse breakdown voltage is lower and depletion capacitance is higher
Reverse breakdown voltage is higher and depletion capacitance is higher

⇒ An end fire array consisting of several half-wave lengths of directive gain 40, then Find width of major lobe for broadside
6°
5.73
51.25
0°

⇒ In a radio receiver with simple AGC
the highest AGC voltage is produced between stations
the faster the AGC time constant, the more accurate the output
an increase in signal strength produces more AGC
the audio stage gain is normally controlled by AGC

⇒ Which one of the systems described by the following I/P - O/P relations is time invariant
y(n) = n x(n)
y(n) = x(n) - x(n - 1)
y(n) = x(- n)
y(n) = x(n) cos 2pf₀n

⇒ In figure the bridge is balanced when Z₄
120∠70°
187.5∠ - 10°
187.5∠ - 70°
333.3∠ - 70°

⇒ The transmitting antennas for lower frequencies (below 500 kHz) are generally
vertical grounded wire type
horizontal suspended wire type
parabolic reflector type
any of the above

⇒

Match the following:

	List I (Octal)		List II (Decimal number)
A.	35	1.	53
B.	65	2.	62
C.	54	3.	29
D.	76	4.	44

A-4, B-3, C-2, D-1
A-1, B-2, C-3, D-4
A-2, B-3, C-1, D-4
A-3, B-1, C-4, D-2

⇒ Which of the following frequencies has the greatest period?
20 Hz
200 Hz
20 kHz
200 kHz

⇒ Consider the following statements

In a pulsed radar, the transmitted pulses are of high frequency
In a pulsed radar, the transmitted pulses are of high power
In a pulsed radar, the transmitted pulses are of brief duration
In a pulsed radar, the transmitted pulses are of square wave shape.

Of the above statements the correct statements are
1 only
1, 2 and 3 only
1, 2, 3, 4
1 and 3 only

⇒ Which stage generates RF carri
Amplifier
Oscillator
Power supply
All of the above

⇒ The current passing through a resistance of 100 ± 0.2% Ω is 2 ± 0.5% A. The limiting error in computation of power will be
± 0.7%
± 0.9%
± 1.2%
± 0.3%

⇒ Which of the following diode is designed to operate in the breakdown region?
Signal diode
Power diode
Zener diode
None of the above

⇒ A single phase half wave converter is feeding a resistive load. Output dc power is P_dc and total power delivered to load is P_ac then
P_dc = P_ac for all values of firing angles
P_dc = P_ac if firing angle is less than 180°
P_dc < P_ac for all values of firing angles
P_dc < P_ac if firing angle is less than 180°

⇒ The RC network of wein bridge oscillator consists of resistors and capacitors of values R = 220 kΩ and C = 250 PF Determine the frequency of oscillation
2.98 kHz
3 kHz
2 kHz
10 kHz

⇒ The theoretical power of white noise is
zero
finite
depend upon frequency of signal
infninite

⇒ Program counter in a digital computer
counts the number of program run in the machine
counts the number of times a subroutine is called
counts the number of times the loops are executed
points the memory address of the current or the next instruction to be executed

⇒ Consider the differential amplifier shown in figure. (Assume β is very hi
2 mA
1 mA
0.5 mA
3 mA

⇒ Materials in order of decreasing electrical conductivity are
aluminium, silver, gold, copper
gold, silver, copper, aluminium
copper, silver, gold, aluminium
silver, copper, gold, aluminium

⇒ Given two numbers A and B in sign magnitude representation in an eight bit format A = 00011110 and B = 10011100 then A ⊕ B gives
10000010
11111
10011101
11100001

⇒ Consider the following, logic diagr
0000 to 1111
0000 to 1001
0000 to 1010
1001 to 0000

⇒ A low ratio of the A.C. load impedance of a diode detector results in
diagonal clipping
poor AGC operation
poor AF response
negative peak clipping

⇒ If ω is the frequency of modulating voltage in FM, the modulation index is proportional to
ω
1/ω
ω
1/ω

⇒

Assertion (A): Silicon is the most favoured semiconductor material.

Reason (R): PIV for silicon diode is more than that for germanium diode.

Both A and R are true and R is correct explanation of A
Both A and R are true but R is not correct explanation of A
A is true but R is false
A is false but R is true

⇒ An amplifier with resistive -ve feedback has two left poles in its open loop transfer function. The amplifier
will always be unstable at high frequencies
will be stable for all frequencies
may be unstable, depending on the feedback factor
will oscillate at low frequencies