Question is ⇒ In a capacitor-start capacitor-run induction motor, Options are ⇒ (A) oil impregnated paper of smal] value and continuous rating is connected in series with the main winding., (B) larger value electrolytic short duty capacitor is connected in series with auxiliary winding through a centrifugal switch., (C) low value oil impregnated paper capacitor is connected in series with the auxiliary winding through a centrifugal switch., (D) both (a) and (b)., (E) , Leave your comments or Download question paper.

Question is ⇒ In a capacitor-start capacitor-run induction motor, Options are ⇒ (A) oil impregnated paper of smal] value and continuous rating is connected in series with the main winding., (B) larger value electrolytic short duty capacitor is connected in series with auxiliary winding through a centrifugal switch., (C) low value oil impregnated paper capacitor is connected in series with the auxiliary winding through a centrifugal switch., (D) both (a) and (b)., (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	In a capacitor-start capacitor-run induction motor
A.	oil impregnated paper of smal] value and continuous rating is connected in series with the main winding. [Wrong Answer]
B.	larger value electrolytic short duty capacitor is connected in series with auxiliary winding through a centrifugal switch. [Wrong Answer]
C.	low value oil impregnated paper capacitor is connected in series with the auxiliary winding through a centrifugal switch. [Wrong Answer]
D.	both (a) and (b). [Correct Answer]
View Answer 2 -1 Explanation:- Answer : D Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒ The magnitude of leakage flux depends on
the magnitude of armature current.
phase angle between armature current and terminal voltage.
air gap thickness.
both (a) and (b).

⇒ If the field winding of a synchronous motor is short circuited and the motor stator is connected to 3-phase ae supply through an auto-transformer, the motor will
start and run as a 3-phase induction motor.
crawl.
hunt.
not start

⇒ For the applications requiring speed ratio other than 2 : 1. the speed control can be affected by varying the number of stator poles employing
multiple stator winding.
pole amplitude modulation technique.
consequent pole technique.
any of the above.

⇒ The synchronous watt is
the torque which under synchronous speed would develop a power of I watt or power input to rotor in watts.
shaft output in watts.
input power to stator.
the unit of ratings of synchronous machines.

⇒ Consider the following statements with respect to aseries R-L-C circuit under resonance condition:
1. All the applied voltage appears across R.
2. There is no voltage across either L or C.
3. The voltage across L and C equal and equal to their maximum values.
Of these statements
1 alone is correct.
2 alone is correct.
1 and 3 are correct.
1 and 2 are correct.

⇒ Squirrel cage induction motors have the disadvantages of
higher starting current and poor starting torque.
high sensitivity to fluctuations in supply voltage and low power factor at light-load.
no possibility of speed regulation.
all of the above.

⇒ The speed of a 4-pole induction motor is controlled by varying the supply frequency while maintaining the ratio of supply voltage to supply frequency (V/f) constant. At rated frequency of 50 Hz and rated voltage of 400 V its speed is 1,440 rpm. Find the speed at 30 Hz, if the load torque is constant.
882 rpm.
864 rpm.
840 rpm
828 rpm.

⇒ The absorption or evolution of heat energy, if a current is allowed to flow in a conductor having its different parts at different temperatures is known ____as effect.
Seebeck
Thomson
Peltier
Joule's

⇒ In a synchronous machine, the stator frame serves the purpose of
holding the armature stampings in position and also in some cases for circulating cold water for cooling.
insulaing the armature windings.
providing path to the magnetic flux.
protecting the whole machine.

⇒ If the load current and flux of a dc motor are held constant and voltage applied across it armature is increased by 5%, the speed of the motor will
increase by 5%.
reduce by 5%.
remain unalternated.
depends on other factors.

⇒ The torque-slip characteristic of an induction motor is approximately a/an
straight line.
rectangular parabola.
parabola.
hyperbola.

⇒ Poles of dc machine are often laminated to
reduce pulsation loss.
reduce armature reaction.
reduce iron weight.
dissipate more heat.

⇒ In case of a high speed universal motor ____ needs maximum attention
air gap
end play
balancing of rotor
insulation of rotor

⇒ A three-phase 440V, 6 pole, 50Hz, squirrel cage induction motor is running at a slip of 5%. The speed of stator magnetic field with respect to rotor magnetic field and speed of rotor with respect to Stator magnetic field are
zero, - 50rpm
zero, 950 rpm
1,000 rpm, -50 rpm
1.000 rpm, 950 rpm

⇒ At the instant of starting, the per unit slip of the 3-phase induction motor is
0.05
0.1
1.0
0.5

⇒ A 4-pole, 50 Hz, 3-phase induction motor has blocked rotor reactance per phase which is four times the rotor resistance per phase. The speed at which maximum torque develops is
1,125 rpm.
1,500 rpm.
1,050 rpm.
1,210 rpm.

⇒ Conservator (for transformer) is used
to take up the expansion of oil due to temperature rise.
to act as an oil storage.
for better cooling of transformer.
None of the above.

⇒ Which of the following statements associated with split-phase motors is incorrect ?
Auxiliary winding is wound of fine wire and is placed in the top of the slots to give high resistance and low reactance.
Main winding has low resistance and high reactance.
Main winding current and auxiliary winding current are 90° out of phase.
Torque developed is proportional to sine of the angle between main winding and auxiliary winding currents.

⇒ In a series R-L-C circuit, the maximum voltage across the capacitor occurs at a frequency
double the resonant frequency.
equal to resonant frequency.
√2 limes the resonant frequency.
below the resonant frequency.

⇒ The running winding of a single phase motor is found earthed on testing. The most probable location of ground fault is at the
end connection
end terminals
slot edge where coil enters or comes out of the slot
anywhere on the winding inside a slot

⇒ Variation in speed by Ward Leonard control of dc motors occurs due to variation in
field excitation.
armature current
armature voltage.
supply voltage

⇒ In Swinburne's test of determination of efficiency of a dc shunt machine the no load input power supplies
armature and shunt field copper losses.
iron losses
friction and windage losses
all of the above

⇒ In a synchronous machine, if the field flux axis is ahead of the armature field axis in the direction of rotation, the machine operating is
synchronous motor.
synchronous generator.
asynchronous motor.
asynchronous generator.

⇒ In the circle diagram of an induction motor the diameter of the circle represents the
rotor current.
line voltage
operating torque
maximum torque.

⇒ An induction motor is fed from a balanced three phase supply at rated voltage and frequency through a hank of three single phase transformers connected in delta-delta. One unit of the bank develops fault and is removed. Then
single phasing will occur and the machine fails to start.
single phasing will not occur but the motor terminal voltages will become unbalanced and the machine can be loaded to the extent of 57.7% of its rating.
the machine can be loaded to the extent of 57.7% of its rating with balanced supply at its terminals.
the machine can he loaded to the extent of 66 ²/3 % of its rating with balanced supply at its terminals.

⇒ Consider the following statements regarding the design of the distributed armature winding in a 3-phase alternator:
1 It reduces the phase belt harmonics.
2 It increases utilization of armature iron and copper.
3 It increases rigidity and mechanical strength of the winding.
4 It reduces copper in the overhang of the winding.
Which of these s ements are correct?
1, 3 and 4.
2, 3 and 4.
1, 2 and 3.
1, 2, 3 and 4.

⇒ Minor insulation in a transformer is the insulation between the
lv winding and core.
lv and hv windings.
turns of the windings.
layers of the windings.

⇒ Five limb construction is preferred over three limb construction as in this type of construction
hysteresis loss is reduced.
eddy current loss is reduced.
magnetic reluctance of the three phase can be balanced.
copper losses are reduced.

⇒ A transformer has a percentage resistance of 2% and percentage reactance of 4%. What are its regulations at power factor 0.8 lagging and 0.8 leading, respectively?
4% and-0.8%
3.2% and- 1.6%
1.6% and - 3.2%
4.8% and - 0.6%

⇒ Which of the following statements regarding repulsion start induction motor is/are correct?
It runs below synchronous speeds on all loads.
lt needs more maintenance of commutator and other mechanical devices.
It makes quite a bit noise on starting.
It starts as a repulsion motor with its brushes set to give maximum torque.