Question is ⇒ In 8085, Options are ⇒ (A) RST 6.5 and RST 5.5 are high level sensitive interrupts, (B) RST 6.5 and RST 5.5 are low level sensitive interrupts, (C) RST 5.5 is low level sensitive interrupt but RST 5.5 is high level-sensitive interrupt, (D) RST 5.5 is low level sensitive interrupt but RST 6.5 is high level sensitive interrupt, (E) , Leave your comments or Download question paper.

Question is ⇒ In 8085, Options are ⇒ (A) RST 6.5 and RST 5.5 are high level sensitive interrupts, (B) RST 6.5 and RST 5.5 are low level sensitive interrupts, (C) RST 5.5 is low level sensitive interrupt but RST 5.5 is high level-sensitive interrupt, (D) RST 5.5 is low level sensitive interrupt but RST 6.5 is high level sensitive interrupt, (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	In 8085
A.	RST 6.5 and RST 5.5 are high level sensitive interrupts [Correct Answer]
B.	RST 6.5 and RST 5.5 are low level sensitive interrupts [Wrong Answer]
C.	RST 5.5 is low level sensitive interrupt but RST 5.5 is high level-sensitive interrupt [Wrong Answer]
D.	RST 5.5 is low level sensitive interrupt but RST 6.5 is high level sensitive interrupt [Wrong Answer]
View Answer 1 -2 Explanation:- Answer : A Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒ The Causal system given below is _______
maximum phase
minimum phase
mixed phase
none of these

⇒

Assertion (A): Microprocessor 8085 can address 65536 memory locations.

Reason (R): Microprocessor 8085 has 16 address lines.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is correct R is wrong
A is wrong R is correct

⇒ Which of the following pulse-time modulation is least used?
PDM
PPM
PWM
PAM

⇒ In following circuit, steady state is reached with S open, S is closed at t = 0, the current I at t = 0⁺ is give
9 Ω
6 Ω
7 Ω
10 Ω

⇒ A (75 - j 40) W load is connected to a co-axial line of z₀ = 75ω at 6 MHz. The load matching on the line can be accomplished by connecting
a short circuit stub at the load
an inductance at the load
a short circuit stub at a specific distance from the load
a capacitance at a specific distance from the load

⇒ By connecting external resistances to a differential amplifier we can adjust
voltage gain
bandwidth
both voltage gain and bandwidth
none of the above

⇒ Inputs A and B of the given figure are applied to a NAND gate. The output is
from 0 to 6
from 0 to 2
from 0 to 1 and 2 to 3
from 1 to 2 and 3 to 4

⇒ In a second order system with a unit step input, the speed of response is high if system is
overdamped
undamped system
critically damped
underdamped

⇒ In a reactance function
all poles are simple
all poles and zeros are simple
all poles and zeros are simple and lie on jω axis only
all poles and zeros lie on negative real axis

⇒ In figure, I = 2A, then
5 V
3 V
2 V
1 V

⇒ The real part of complex dielectric constant and tanδ for a dielectric are 2.1 and 5 x 10^-4 at 100 Hz respectively. The imaginary part of dielectric constant at 100 Hz is
1.05 x 10^-3
2.1 x 10^-3
5 x 10^-3
1.05 x 10^-2

⇒ The minimum permissible size of aluminium cable for lighting circuit is
1.2 sq. mm
1.5 sq. mm
2.2 sq. mm
3.5 sq. mm

⇒ For the K map of the given figure the simplified Boolean expressio
AC + A B
A BC + A B C + A B C + AB C
AC + A B + AC
A C + A B + AB

⇒ In a bipolar transistor, the base collector junction has
forward bias
reverse bias
zero bias
zero or forward bias

⇒ The eigen values of a skew symmetric matrix are
always zero
always pure imaginary
either zero or pure imaginary
always real

⇒ Which of the following statements is true regarding the fundamental mode of the metallic waveguides sh
Only P has no cutoff- frequency
Only Q has no cutoff- frequency
Only P has no cutoff- frequency
All there have cut-off frequency

⇒ The IF frequencies in a TV receiver
38.9 MHz for video and 33.4 MHz for audio
38.9 MHz for both video and audio
33.4 MHz for both video and audio
33.4 MHz for video and 38.9 MHz for audio

⇒ The equivalent unit of joule is
newton
newton-meter
newton-metre²
none of the above

⇒ The most serious problems in ac bridge measurement is
eddy currents
leakage current
residual magnetism
stray fields

⇒ Diffraction of EM waves
arises only with spherical wave front
may occur around the edge of an obstacle
occurs when waves pass through a big slot
none of the above

⇒ The poles and zeros of a positive real function
may lie any where in s plane
may have positive or negative real part
must occur in conjugate pair
must have either negative or zero real part

⇒ The equation ∇ . J = 0 is called
Poisson's equation
Kirchoff's node equation
Continuity equation for static currents
Continuity equation for sampling currents

⇒ Transfer function of a linear system is 200 e^-j10ω The system is a
distortionless Attenuator
amplifier with Phase distortion
distortionless Amplifier
attenuator with Phase distortion

⇒ In a transistor which of the following region is very lightly doped and is very thin?
Emitter
Base
Collector
None of the above

⇒

Assertion (A): CO₂ has no resultant dipole moment but CO has a dipole moment.

Reason (R): The structure of CO₂ is O = C = O.

Both A and R are true and R is correct explanation of A
Both A and R are true but R is not correct explanation of A
A is true but R is false
A is false but R is true

⇒ A series RLC circuit has a resonant frequency of 1000 Hz. The maximum voltage across C is likely to occur at a frequency of about
1000 Hz
2000 Hz
1025 Hz
975 Hz

⇒ In a television camera tube, scanning of a picture is done
line by line from left to right
line by line from right to left
line by line from top to bottom
line by line from bottom to top

⇒ In figure, the position of voltmeter and ammeter are exchanged. It may result in damage
both the instruments
ammeter
voltmeter
neither of two

⇒ A virtual ground is a ground for
voltage
current
both voltage and current
voltage but not for current

⇒

Assertion (A): Intrinsic resistivity of silicon is lower than that of germanium.

Reason (R): Magnitude of free electron concentration in germanium is more than that of silicon.

Both A and R are true and R is correct explanation of A
Both A and R are true but R is not correct explanation of A
A is true but R is false
A is false but R is true