Question is ⇒ Discrete transistors T1 and T2 having maximum collector current rating of 0.75 amp are connected in parallel as shown in the figure, this combination is treated as a single transistor to carry a total current of 1 ampere, when biased with self bias circuit. When the circuit is switched on, T1 draws 0.55 amps and T2 draws 0.45 amps. If the supply is kept on continuously, ultimately it is very likely, Options are ⇒ (A) Both T1, and T2 get damaged, (B) Both T1, and T2 will be safe., (C) T1 Will get damaged and T2 will be safe, (D) T2 will get damaged and T1, will be safe., (E) , Leave your comments or Download question paper.

Question is ⇒ Discrete transistors T1 and T2 having maximum collector current rating of 0.75 amp are connected in parallel as shown in the figure, this combination is treated as a single transistor to carry a total current of 1 ampere, when biased with self bias circuit. When the circuit is switched on, T1 draws 0.55 amps and T2 draws 0.45 amps. If the supply is kept on continuously, ultimately it is very likely, Options are ⇒ (A) Both T1, and T2 get damaged, (B) Both T1, and T2 will be safe., (C) T1 Will get damaged and T2 will be safe, (D) T2 will get damaged and T1, will be safe., (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	Discrete transistors T₁ and T₂ having maximum collector current rating of 0.75 amp are connected in parallel as shown in the figure, this combination is treated as a single transistor to carry a total current of 1 ampere, when biased with self bias circuit. When the circuit is switched on, T₁ draws 0.55 amps and T₂ draws 0.45 amps. If the supply is kept on continuously, ultimately it is very likely
A.	Both T₁, and T₂ get damaged [Wrong Answer]
B.	Both T₁, and T₂ will be safe. [Wrong Answer]
C.	T₁ Will get damaged and T₂ will be safe [Correct Answer]
D.	T₂ will get damaged and T₁, will be safe. [Wrong Answer]
View Answer 1 -1 Explanation:- Answer : C Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒ A 1 ms pulse can be converted into a 10 ms pulse by using which one of the following
An astable multivibrator
Stable multivibrator
A bistable multivibrator
A J-K flip-flop

⇒ Non-coherently detection is not possible for
PSK
ASK
FSK
both (a) and (c)

⇒ In a three phase series inverter, the firing frequency is
three times output frequency
six times output frequency
twice the output frequency
equal to output frequency

⇒ Inputs A and B of the given figure are applied to a NAND gate. The output is
from 0 to 6
from 0 to 2
from 0 to 1 and 2 to 3
from 1 to 2 and 3 to 4

⇒ In a shunt-shunt negative feedback amplifier, as compared to the basic amplifier
both input and output impedances, decrease
input impedance decreases but output impedance increase
I/P impedance increases but O/P impedance decreases
both input and O/P impedance increases

⇒

Assertion (A): Temperature control of the passenger compartment of car uses both feed forward and feedback controls.

Reason (R): Feed forward control gives corrective action before the disturbance affects the output and feedback control applies corrective action after output changes.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is correct but R is wrong
R is correct but A is wrong

⇒ For VLF antennas radiation resistance is usually of the order of
less than one ohm
13 to 20 ohms
around 100 ohms
more than 200 ohms

⇒ For a nonlinear resistance
v-i plot is not a straight line
resistance increases as current increases
resistance decreases as current increases
current decreases as voltage increases

⇒ A transmitted using AM has in modulated carrier output power of 10 KW and can be modulated to a maximum depth of 90% by a sinusoidal modulating voltage without causing overloading. Find the value to which an modulated carrier power can be increased without resulting in overloading if the maximum permitted modulating index is 40%
14 KW
12.96 KW
26.96 KW
2.96 KW

⇒ The electric intensity for free space is given by
ε₀d
σ/ε₀
σ.ε₀
d/ε₀

⇒ The multiplier resistance and meter coil in a voltmeter are in
series
parallel
series-parallel
either (a) or (b)

⇒ In an n channel MOSFET, the substrate is connected
to negative terminal of battery
to positive terminal of battery
to either positive or negative terminal of battery
none of the above

⇒ In a coupled coil the primary has 100 turns and secondary has 200 turns. The primary produces, a flux Φ = e^-t. The coefficient of coupling is 1. The voltages induced in secondary is
200 e^-t V
200 e^t V
200 V
none of the above

⇒ In a CRO the Y plates are oriented
horizontally
vertically
at an angle of 20° of horizontal
at an angle of 70° of horizontal

⇒

Assertion (A): Operator has a value 1 ∠ - 90° or 1 ∠ 90°.

Reason (R): Operator 'a' has a value 1 ∠ 120°.

Both A and R are true and R is correct explanation of A
Both A and R are true and R is not the correct explanation of A
A is true but R is false
A is false but R is true

⇒ The AM, PM, and TV broadcast frequencies are
of the same order as microwave range
much lower than microwave range
much higher than microwave range
either (a) or (c)

⇒ An alternating current or voltage is that which
changes in magnitude only
changes in direction only
both (a) and (b)
has a random movement of electrons

⇒ In fabricating silicon BJT in ICs by the epitaxial process, the number of diffusions used is usually
2
3
4
6

⇒ The disadvantage of direct coupled amplifiers is
drift
large size of transistor
low voltage gain
both (b) and (c)

⇒ The current through the coil of an electromagnet is doubled. The magnetic field around the coil
is halved
is doubled
becomes four times
remains the same

⇒ In an n-p-n transistor, the majority carriers in the base are
electrons
holes
both holes and electrons
either holes or electrons

⇒ T.V. antennas are usually
Yagi-Uda
loops
helical
parabolic

⇒ What is the direction of control bus?
Unidirection into μp
Unidirection out of up
Bidirectional
Mixed direction i.e., some lines into μp and some other out of μp

⇒ In TE₁₀ mode of rectangular waveguide
there is one half sine wave variation along x direction and one along y direction
there is one half sine wave variation along y direction and one along x direction
there is one full sine wave variation along x direction and one along y direction
none of the above

⇒ In a CE amplifier, the collector resistance is 6 kΩ and load resistance is 3 kΩ. The ac load resistance is
9 kΩ
6 kΩ
3 kΩ
2 kΩ

⇒ A rectangular waveguide measures 3 x 4.5 cm internally and has a 10 GHz signal propagated in it. Calculate the wave impedance for dominant mode.
130 p
1.3 p
120 p
12 p

⇒ A helical antenna is used for satellite tracking due to its
good front to back ratio
broad bandwidth
circular polarization
both (a) and (b)

⇒ To find current in a resistance connected in a network, Thevenin's theorem is used V_TH = 20 V and R_TH = 5 Ω. The current through the resistance
is 4 A
is 4 A or less
is less than 4 A
may be 4 A or less or more than 4 A

⇒ The poles and zeros of a positive real functions are real or occur in conjugate pair.
TRUE
FALSE

⇒

Assertion (A): Impatt diode can be used in both amplifiers and oscillators.

Reason (R): Impatt diode has a low resistance.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is correct but R is wrong
A is wrong but R is correct