Question is ⇒ Aperture circuit produces __________ in sample hold circuit., Options are ⇒ (A) the total sampling time, (B) delay between the instance at which hold command is initiated and the instance at which O/P starts tracking I/P, (C) the time taken by O/P to settle within the specified 1% error band, that of the I/P, (D) time required by holding capacitor to reach upto the level close to input, (E) , Leave your comments or Download question paper.

Question is ⇒ Aperture circuit produces __________ in sample hold circuit., Options are ⇒ (A) the total sampling time, (B) delay between the instance at which hold command is initiated and the instance at which O/P starts tracking I/P, (C) the time taken by O/P to settle within the specified 1% error band, that of the I/P, (D) time required by holding capacitor to reach upto the level close to input, (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	Aperture circuit produces __________ in sample hold circuit.
A.	the total sampling time [Wrong Answer]
B.	delay between the instance at which hold command is initiated and the instance at which O/P starts tracking I/P [Correct Answer]
C.	the time taken by O/P to settle within the specified 1% error band, that of the I/P [Wrong Answer]
D.	time required by holding capacitor to reach upto the level close to input [Wrong Answer]
View Answer 1 -2 Explanation:- Answer : B Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒ What is the RF amplifier plate voltage when the audio-modulating voltage is +600
-600 V
Zero
600 V
1200 V

⇒ The more negative gate voltage, the conductive channel becomes
narrower
wider
thicker
linear

⇒ Which of the following identifiers is valid in Pascal?
THETA
NUM
1 ST
$ BETA

⇒ In following figure find V_GG by assuming gate current is negligible for the p-channel JFET. (if I_DQ = - 6 mA, R_S = 0, V_DD = -18 V, R_D = 2 kΩ, I_DSS = - 10 mA, I_PO = - 3 V)
0.67 V
6.7 V
7 V
0.3 V

⇒ Which of the following is invalid in Basic?
A ** B - C
5.2 ** 4.3
5.2 ** (- 4.3)
(- 5.2) ** (4.3)

⇒ In figure, the curre
is 2 A from A to B
is 2 A from B to A
depends on the value of R
none of the above

⇒ A hexadecimal odometer displays F52F. The next reading will be
E 52 F
E 52 E
E 53 F
F 53 O

⇒ Choose the correct option

Mesh is the smallest loop of circuit
Loop is smallest path of circuit
Loop does not contain any mesh
Loop may have one or more than one mesh

1, 2, 3, 4
3, 4, 2
1, 4
3, 2

⇒ Read the following statements about 8085

RAL instruction rotates ACC contents left by 1 bit
When RAL instruction is executed once the binary number gets doubled
STC means set CY to 1

Which of the above statements are correct?
1 and 2 only
1, 2 and 3 only
1, 2 and 4 only
1 and 4 only

⇒ A Yagi antenna has a driven antenna
only
with a reflector
with one or more directors
with a reflector and one or more directors

⇒ A transmitter serial current contains
carrier frequencies
audio frequencies
radio frequencies
none of the above

⇒

Assertion (A): If difference between static and optical dielectric constant is high, the mechanical compressiblity of that material is also high.

Reason (R): For soft ions, ionic polarization per unit field is higher than that of hard ions.

Both A and R are true and R is correct explanation of A
Both A and R are true but R is not correct explanation of A
A is true but R is false
A is false but R is true

⇒ E_G for silicon is 1.12 eV and that for germanium is 0.72 eV. Therefore, it can be concluded that
the conductivity of silicon will be less than that of germanium at room temperature
the conductivity of silicon will be more than that of germanium at room temperature
the conductivity of two will be same at 60°C
the conductivity of two will be same at 100°C

⇒ For measuring temperatures below 800°C with high accuracy, the best instrument is
optical pyrometer
thermistor based thermometer
GaAs junction diode thermometer
platinum resistance thermometer

⇒ As the temperature of semiconductor is increased
the average number of free charge carriers decreases
the average number of free charge carriers increases
the average number of free charge carriers remains the same
the average number of free charge carriers may increase or decrease

⇒ In Jone chopper, the commutating element
is a capacitor
is a capacitor and an inductor
is a capacitor and an auto transformer
none of the above

⇒ Which one is Analog Continuous modulation technique?
AM
DM
PAM
PCM

⇒ A particular green LED emits light of wavelength 5490, Å, the energy bandgap of the semiconductor material used there is .. h = 6.6 x 10^-34 J sec.
2.26 eV
1.98 eV
1.17 eV
0.74 eV

⇒

Assertion (A): In 8085, the zero flag is set when ALU operation results in 0. If the result is not 0, this flag is reset.

Reason (R): In 8085 the S flag is set when the contents of accumulator become negative during execution of an instruction.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is correct R is wrong
A is wrong R is correct

⇒ In a broadcast superheterodynes receiver having no RF amplifier, the loaded Q of the antenna coupling circuit is 100. If the intermediate frequency is 455 kHz. The image frequency at 25 MHz will be
24.09 MHz
24.54 MHz
25.45 MHz
25.91 MHz

⇒ Consider the voltage transfer characteristic of a standard CMOS inve
NMOS and PMOS triode
Both are saturation
NMOS saturated PMOS linear
None of these

⇒

Assertion (A): In a full wave rectifier output the lowest ac component is at twice the input frequency

Reason (R): In a full wave rectifier, the output waveform consists of half sinusoids

Both A and R are correct and R is correct explanation for A
Both A and R are correct but R is not correct explanation for A
A is correct R is wrong
A is wrong R is correct

⇒ Consider the following statements as regards DPSK and DEPSK

DPSK demodulator requires a device which operates at carrier frequency and provides a delay of bit time T_b
In DPSK, synchronous demodulation recovers the signal b(t) and the decoding of b(t) to generate d(t) is done at base band
In both DPSK and DEPSK errors always occur in pairs

Which of the above statements are correct?
1 and 3
1 and 2
2 and 3
1, 2 and 3

⇒ Directivity gain depends on
the distribution of radiated power in space
solid angle of the radiated field pattern
both (a) and (b)
none of the above

⇒ In a resistor the current is i and the voltage is v. The rate of dissipation of heat at any time t is
vi
vit
vt
vit²

⇒ A full subtractor has a total of
2 inputs
3 inputs
4 inputs
5 inputs

⇒ In 8085, to disable the whole interrupt system (except TRAP)
the DI instruction may be used
the DO instruction may be used
the INTERRUPT instruction may be used
the El instruction may be used

⇒ In a superheterodyne receiver, the IF stage has better selectivity than RF stage because
of higher frequency
of lower frequency
of high L/C ratio
of constant passband

⇒ In an 8085 microprocessor, the instruction CMP B has been executed while the content of the accumulator is less than that of register B, As a result.
carry flag will be set but zero flag will be reset
carry flag will be reset but zero flag will be set
both carry flag and zero flag will be reset
both carry flag and zero flag will be set

⇒ A Weston synchronoscope is a
moving coils instrument
moving iron instrument
dynamometer instrument
induction instrument