Question is ⇒ A resistance R, inductance L and capacitance C are in series. The source frequency is adjusted to be equal to resonant frequency. The lower half power frequency is ω1. Another resistance R is added in series with the circuit. The new lower half power frequency will be, Options are ⇒ (A) ω1, (B) less than ω1, (C) more than ω1, (D) either more than ω1 or less then ω1, (E) , Leave your comments or Download question paper.

Question is ⇒ A resistance R, inductance L and capacitance C are in series. The source frequency is adjusted to be equal to resonant frequency. The lower half power frequency is ω1. Another resistance R is added in series with the circuit. The new lower half power frequency will be, Options are ⇒ (A) ω1, (B) less than ω1, (C) more than ω1, (D) either more than ω1 or less then ω1, (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	A resistance R, inductance L and capacitance C are in series. The source frequency is adjusted to be equal to resonant frequency. The lower half power frequency is ω₁. Another resistance R is added in series with the circuit. The new lower half power frequency will be
A.	ω₁ [Wrong Answer]
B.	less than ω₁ [Wrong Answer]
C.	more than ω₁ [Correct Answer]
D.	either more than ω₁ or less then ω₁ [Wrong Answer]
View Answer 1 -1 Explanation:- Answer : C Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒ In the circuit of figure, the waveshape of load current when thyristor conducting
constant
increasing exponentially
decreasing exponentially
either (b) or (c)

⇒ Gain margin and phase margin can be determined from Bode plots as well as Nyquist plot.
TRUE
FALSE

⇒

Assertion (A): Tunnel diode is used in many pulse and digital circuits.

Reason (R): The v-i curve of a tunnel diode resembles letter 'N'.

Both A and R are true and R is correct explanation of A
Both A and R are true but R is not a correct explanation of A
A is true but R is false
A is false but R is true

⇒

Assertion (A): FET is a unipolar device.

Reason (R): BJT is bipolar device.

Both A and R are true and R is correct explanation of A
Both A and R are true but R is not a correct explanation of A
A is true but R is false
A is false but R is true

⇒ A buffer is a device that isolates other devices. Typically a buffer has
a high input impedance and a low output impedance
a high input impedance as well as output impedance
a low input impedance and a high output impedance
a low input impedance as well as output impedance

⇒

Assertion (A): The colour signal consists of only luminance signal

Reason (R): In India PAL colour signal system is used.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is correct but R is wrong
A is wrong but R is correct

⇒ Statement 1
Statement 1 is true but statement 2 is false
Statement 1 is false but statement 2 is true
Both the statements are true
Both the statements are false

⇒ Which chopper circuit uses saturable reactor?
Auxiliary commutated
Jones chopper
Morgan chopper
Load commutated

⇒ A multimeter can be used as ohmmeter.
TRUE
FALSE

⇒ The scale of thermocouple instrument is linear.
TRUE
FALSE

⇒ A two port network is reciprocal if and only if
Z₁₁ = Z₂₂
BC - AD = - 1
Y₁₂ = Y₂₁
h₁₂ = h₂₁

⇒ As per temperature limits, the number of categories of solid dielectrics are
7
6
8
5

⇒ In the human eye, an image persists for a time of about
1 second
0.1 second
0.05 second
0.02 second

⇒ The maximum percent overshoot with maximum value of first overshoot as 3.5 V and steady state value as 2.575 V is
0.3592
0.2643
0.5761
0.1524

⇒ The bandwidth required for amplitude modulation is
half the frequency of modulating signal
equal to the frequency of modulating signal
twice the frequency of modulating signal
four times the frequency of modulating signal

⇒
Assertion (A): Schottky transistors are preferred over normal transistors in digital circuits
Reason (R): A Schottky transistor when used as a switch, between cutoff and active region.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is true, R is false
A is false, R is true

⇒ High frequency oscillations can be caused by
electric coupling
magnetic coupling
ground loop
all of the above

⇒ When a function Z(s) having a pole at infinity is realized, we get
a capacitance in series
a resistance in series
an inductance in series
a resistance or inductance in series

⇒ A signal x(n) = sin(ω₀n + φ) is the input to a linear time invariant system having a frequency response H(e^jω) If the O/P of the system is Ax(n -n₀), then the general form of H(e^jω) will be
- n₀ω₀ + β for any arbitrary real β
- n₀ω₀ + 2pk for any arbitrary integer k
n₀ω₀ + 2pk for any arbitrary integer k
- n₀ω₀ + φ

⇒ Fourier transform F(jω) of an arbitrary signal has the property
F(jω) = F(- jω)
F(jω) = - F(- jω)
F(jω) = F*(- jω)
F(jω) = - F*(jω)

⇒ In a CD the sampling frequency is nearly
half the highest frequency in audio signal
equal to highest frequency in audio signal
double the highest frequency in audio signal
four times the highest frequency in audio signal

⇒ A voltage doubler circuit uses
two diodes
two capacitors
two diodes and two capacitors
none of the above

⇒ Which of these commutation methods uses two leads?
Class A
Class B
Class C
Class D

⇒
Match the following:
List I (Functional headings of instruction set of 8085) List II (Functions performed)
A. Branch group 1. Compares, rotates etc.
B. Logic group 2. Moves, loads, stores etc.
C. Data transfer group 3. Initiates conditional or unconditional jumps, calls etc.

A-1, B-2, C-3
A-2, B-3, C-1
A-3, B-1, C-2
A-1, B-3, C-2

⇒ A single phase full converter gives maximum and minimum output voltage at firing angles of
0 and 180° respectively
180° and 0° respectively
0 and 90° respectively
90° and 0° respectively

⇒ An antenna has a resistance of 50 Ω and an equivalent noise resistance of 30 Ω The noise figure in decibels is
1.6 dB
2 dB
3.6 dB
6 dB

⇒ In LIFO
only the top of the stack is immediately accessible
only the top of the stack is never accessible
only the first-in is accessible
only the first-in is not accessible

⇒ Greatest mobility can be expected in case of
holes
protons
electrons
negative ions

⇒ The impedance inversion may be objected with
a short-circuited stub
an open-circuited stub
a half-wave line
a quarter-wave line

⇒
Assertion (A): In class C amplifier the efficiency is more than that for other classes of amplifiers
Reason (R): In class C amplifier we can get high efficiency over a wideband

Both A and R are correct and R is correct explanation for A
Both A and R are correct but R is not correct explanation for A
A is correct R is wrong
A is wrong R is correct

	List I (Functional headings of instruction set of 8085)		List II (Functions performed)
A.	Branch group	1.	Compares, rotates etc.
B.	Logic group	2.	Moves, loads, stores etc.
C.	Data transfer group	3.	Initiates conditional or unconditional jumps, calls etc.

Users Also Read
Previous Papers

Aptitude

Reasoning

Gen.Knowledge

Speak English

English / Verbal

Online / Mock Test

Vedic Math