Question is ⇒ A coil of resistance R and inductance L is connected in series with 10 mF capacitor. The resonant frequency is 1000 Hz. Another 10 F capacitor is connected in parallel with the above capacitor. The new resonance frequency will be, Options are ⇒ (A) 1000 Hz, (B) more than 1000 Hz, (C) less than 1000 Hz, (D) may be more or less than 10000 Hz, (E) , Leave your comments or Download question paper.

Question is ⇒ A coil of resistance R and inductance L is connected in series with 10 mF capacitor. The resonant frequency is 1000 Hz. Another 10 F capacitor is connected in parallel with the above capacitor. The new resonance frequency will be, Options are ⇒ (A) 1000 Hz, (B) more than 1000 Hz, (C) less than 1000 Hz, (D) may be more or less than 10000 Hz, (E) , Leave your comments or Download question paper. Previous question Next question


Q1.	A coil of resistance R and inductance L is connected in series with 10 mF capacitor. The resonant frequency is 1000 Hz. Another 10 F capacitor is connected in parallel with the above capacitor. The new resonance frequency will be
A.	1000 Hz [Wrong Answer]
B.	more than 1000 Hz [Wrong Answer]
C.	less than 1000 Hz [Correct Answer]
D.	may be more or less than 10000 Hz [Wrong Answer]
View Answer 1 -1 Explanation:- Answer : C Discuss it below : !! OOPS Login [Click here] is required to post your answer/result Help other students, write article, leave your comments

Previous question Next question

Also Read Similar Questions Below :

⇒ 84₁₆ - 2A₁₆ is equal to
5A₁₆
4A₁₆
7A₁₆
15A₁₆

⇒ Inputs A and B of the given figure are applied to a NAND gate. The output is
from 0 to 6
from 0 to 2
from 0 to 1 and 2 to 3
from 1 to 2 and 3 to 4

⇒ In monostable multivibrator
has no stable state
has one stable state
has two stable states
switches automatically from one state to other state

⇒ In p-n-p transistor the current I_E has two components viz. I_EP due to injection of holes from p-region to n-region and I_E due to injection of electrons from n-region to p-region. Then
I_Ep and I_En are almost equal
I_Ep >> I_En
I_En >> I_Ep
either (a) or (c)

⇒ Which of the following input is not possible in case of a SR flip-flop?
S = 0, R = 0
S = 0, R = 1
S = 1, R = 0
S = 1, R = 1

⇒ A heterodyne frequency changer is called a
Modulator
Mixer
Demodulator
Frequency translator

⇒

Assertion (A): The equation D = ∈₀∈_rE is applicable only to isotropic materials.

Reason (R): In polycrystalline materials, the directional effects are absent.

Both A and R are true and R is correct explanation of A
Both A and R are true but R is not correct explanation of A
A is true but R is false
A is false but R is true

⇒ 4 bit ripple counter and 4 bit synchronous counter are made using flip-flop having a propagation delay of 10 ns each. If the worst case delay in the ripple counter and the synchronous counter be R and S respectively, then
R = 10 ns, S = 40 ns
R = 40 ns, S = 10 ns
R = 10 ns, S = 30 ns
R = 30 ns, S = 10 ns

⇒ The circuit whose properties are same in either direction is known as
unilateral circuit
bilateral circuit
irreversible circuit
reversible circuit

⇒ The code which provides for parity check is
Baudot
ASCII
EBCDIC
Excess-3

⇒ Which of the following 8085 instructions do not effect CY flag?
SEE M
SEE R
DCRM
ADC M

⇒ In figure, V_{020 V
10 V
5 V
0}

⇒ India's Polar Satellite Launch vehicle (PSLV) to be ready in 1991 is designed to launch 1000 kg spacecraft into __________ orbit.
geostationary
equatorial
polar
sun-synchronous polar

⇒ For an op-amp source follower circuit
input and output voltages have same magnitude
output and input voltages are in phase
output and input voltages are in phase but have different magnitudes
output and input voltages have same magnitude and are in phase

⇒ In a series RLC circuit, p-f is leading if X_C < X_L.
TRUE
FALSE

⇒ If R, L, C are in parallel, the currents through L and C are equal in magnitude at resonance.
TRUE
FALSE

⇒ If C is spring constant and θ is deflection, controlling torque is
Cθ
C/θ
θ/C
C²θ

⇒ Which quantity controls the effectiveness of LED in emitting light?
Applied voltage
Current
Extent of doping
Temperature

⇒ Which of the following is not a valid character constant in C?
A'
2'
='
2

⇒ 24 telephone channels, each band limited to 3.4 kHz, are to be time division multiplexed by using PCM, calculate the bandwidth of PCM system for 128 quantization levels and an 8 KHz sampling frequency
192 kHz
2 MHz
1.299 MHz
1.54 MHz

⇒ To ensure good transient response in audio systems the natural frequencies should be
above 40 Hz and below 15 kHz
above 40 Hz
above 15 kHz
below 40 Hz and above 15 kHz

⇒ When three 100 K, ± 10% fixed resistors of 1/4 W Power rating are connected in parallel, the resulting 33 K resistor will have a tolerance specification and power rating of
± 10% and 3/4 W respectively
± 10% and 1/12 W respectively
± 3.3.% and 3/4 W respectively
± 30% and 3/4 W respectively

⇒ The discrete time system describes by y(n) = x(n²) is
casual, Linear, time varying
casual, non-linear, timevari
non-casual, Linear, time invariant
non-casual, non-linear, time variant

⇒ A microprocessor uses 3 MHz oscillator. The duration of one T state is
1 μs
0.666 μs
0.333 μs
3 μs

⇒ The total number of input words for 4 input OR gate is
20
16
12
8

⇒ The name field effect is related to the __________ layers of a JFET.
depletion
drain
source
gate

⇒ The 10 MHz in the specification of CRO means that
the sweep frequency is 10 MHz
the frequency of input signal should not be more than 10 MHz
the vertical amplifier has been designed for 10 MHz
none of the above

⇒ In the NMOS inverter
the driver and achieve load are enhancement type
the driver is enhancement type and load depletion type
both driver and load are depletion type
the driver and load are depletion type

⇒ A periodic voltage v(t) = 1 + 4 sin ωt + 2 cos ωt is applied across a 1 ohm resistance. The power dissipated is
1 W
11 W
21 W
24.5 W

⇒ In a Karnaugh map for an expression having 'don't care terms' the don't cares can be treated as
0
1
1 or 0
none of the above